APRAMO modul max R129 Bedienungsanleitung Seite 12

06
®
2.2 Installation of apramo modül | max R129 High Back Booster
with Avia-Fix on the vehicle by ISOFIX connectors
1) For easier installation of the car seat, we recommend inserting the
plastic fitting guides over the ISOFIX anchor points of the vehicle
(Fig. 2).
2) Once you have operated the ISOFIX extension lever (1) on the
front of the car seat base, the ISOFIX connectors (2) will extend
outwards and be ready for fitting to the vehicle seat (Fig. 3).
3) Insert the ISOFIX connectors (2) into the openings for the vehicle's
ISOFIX anchor points and then push them together, without force,
until you hear two "clicks". The ISOFIX connection Indicator (7)
should turn from red to green (Fig. 4).
4) Push the ISOFIX extension lever (1) upwards, while pushing the
seat base towards the vehicle seat backrest until they are in firm
contact. Once this is achieved, release the ISOFIX extension lever
(1).
5) Then the seat is now correctly installed.
GB
modül | max R129 High Back Booster with Avia-Fix
installation of apramo
®
2.3 Installation of apramo
with Avia-Fix on the vehicle by 3-point adult safety belt only
® modül | max R129 High Back Booster with Avia-Fix can
The apramo
also be installed in a vehicle not equipped with ISOFIX anchor points.
To use the seat in this mode, the ISOFIX connectors (1) must be in the
fully retracted position (Fig.6) to allow the seat to be positioned in
contact with the vehicle seat backrest (Fig.7).
WARNING!
THE modül I max R129 High Back Booster with Avia-Fix MUST
ALWAYS BE SECURED WITH THE ADULT SEAT BELT EVEN WHEN
IT IS NOT USED TO CARRY A CHILD. IN THE EVENT OF AN
ACCIDENT, IT COULD MOVE AND HIT PASSENGERS INSIDE THE
VEHICLE, CAUSING THEM TO BE INJURED.
Once the child car seat is correctly positioned and the adult seat belt
fitted through the indicated belt path guides, it is possible to restrain
the child in the seat.
®
modül | max R129 High Back Booster