Labor Pro MULTIWAVE B280L Gebrauchsanweisung Und Garantie Seite 8

Read the notes in the following booklet
carefully as they provide important
information regarding safety, use and
maintenance.
Keep and do not damage the
instructions to
reference.
PRODUCT WARNINGS
This appliance is to be used only for
the purpose for which it was expressly
designed, i.e. as a Iron for waving hair.
Any other use, e.g. use on animals or
wigs, is incorrect. Labor Pro accepts
no liability for improper use of the
appliance.
Do not use the appliance, do not
connect or disconnect the power plug
from outlet with wet hands.
Always check that the appliance
is powered by an electrical source
whose voltage corresponds to that
indicated on the label.
Do not leave
unattended when plugged in.
Do not wrap the cord around the main
body when storing the appliance. Do
not place heavy objects on the cord,
twist it or crush it.
Do not use with the cord coiled around
itself or around the appliance.
Do not use the appliance if the power
plug moves freely in the socket.
Insert the plug fully directly into the
socket: do not use extension cords.
Do not use near flammable materials
(such as alcohol, gasoline, thinner,
aerosol sprays, hair care products, or
nail polish removers).
Do not damage, modify, bend, pull,
or kink the cord. Also, do not place
heavy objects on the cord or crush it.
Do not place the appliance in the
bathroom or in places with high
humidity.
Also, do not place it where it could
dripping water (for example on top of
the washbasin cabinet).
8
ENGLISH - TRANSLATION OF THE ORIGINAL INSTRUCTIONS
allow for future
the appliance
Unplug the appliance from socket by
grasping the plug and not by pulling
on the cord.
Do not touch the parts shown in
the image below when using or
immediately after, since they will be
hot.
Take care to avoid contact between
the hot surfaces of the appliance and
the skin, paying particular attention to
the face, neck and hands.
Do not immerse the appliance in
water or wash it with water.
Store the appliance in a cool, dry
place away from light and heat
sources.
WARNINGS IN THE EVENT
OF PRODUCT FAILURE OR
MALFUNCTION
In the event of malfunction or failure,
discontinue use
electric shock or injury may result.
PREPARATION AND USE
1. Insert the plug of the power cable
(8) into the power socket. The
display (2) will show "OFF".
2. Press the power button (5) for more
than 3 seconds to activate the
appliance.
3. The display (2) shows the preset
temperature of 180°C and the
movement of
indicates that the appliance is
warming up. After 5 seconds, the
display shows
detected by the hotplate.
4. It is possible to follow the heating
progression
temperature is reached.
immediately;
the side band
the temperature
until the preset
fire,