Changing The Batteries - Soba NW510 Gebrauchsanleitung

DIET SCALE NW510
Using Tare (or net weight) mode
If a container is used when weighing, put the empty container on the weigh plate
before switching on. Alternatively, put it on the weigh plate after switching on and
press the "Tare" key so the weight of the container is deducted. The scales are ready
as soon as "0 g/0 oz" appears on the display.
N.B. Press the "Tare" key when the food item is on the scales to reset to zero. As soon
as the food item is removed, the display shows a negative value.
Weighing
Switch the scales on by pressing the ON/OFF key. As soon as "0 g/0 oz" appears on
the display you can put the item to be weighed on the weigh plate and read off the
weight.
N.B. When not in use the scales switch off automatically after 60 seconds.

Changing the batteries

1. Remove the glass weigh plate and turn the scales over on a firm surface.
2. Open the battery compartment.
3. Insert two CR2032 lithium button batteries.
4. The batteries must be placed in the centre between anode and cathode.
5. Close the battery compartment.
N.B.
1. Always remove the batteries, if the scales are not used for some time.
2. Always respect the environment when disposing of exhausted batteries. Take
them to an authorised collection point.
N.B.
Remove the protective cardboard before using the scales.
5
INSTRUCTION MANUAL