The safety can no longer be insured if the instrument:
shows obvious damage
•
does not carry out the desired measurements
•
has been stored for too long under unfavourable conditions
•
has been subjected to mechanical stress during transport.
•
All relevant statutory safety regulations must be adhered to when using this instrument.
Appropriate Usage
The instrument may only be used under those conditions and for those purposes for which
it was conceived. For this reason, in particular the safety references , the technical data
including environmental conditions and the usage in dry environments must be followed.
3.0 Control Elements and Connections
Elma 1500B
• Handle test probe - (L1)
• Instrument test probe +
(L2)
• LEDs for voltage display
• LED for single-pole
phase test
• LED for continuity
• Polarity indication
• Battery case
• Probe-tip protection
(Zeichnung)
Elma 107
Do not use this instrument under damp conditions.
If the operator's safety cannot be guaranted, the instrument must
be removed from service and protected against use.
Page 37