Connecting Your Speakers - Pyle Pdwr50W Bedienungsanleitung

FINAL ADJUSTMENTS
1.After checking that the speakeris in phase and works correctly,
angle the speakerfor the best sound.
2. Hand-tighten the bracket knobs only. Powertools may over-tight-
en the knob and strip the threads of the insert.
3. Check that the entire installation

Connecting Your Speakers

Connecting the speakers to your amplifier
or receiver.
• First,turn your amplifier off to avoid
damage which may result from accidental
shorting of the speaker leads.
• Correct phase polarity is critical for proper
stereo imaging and bassperformance.
The red (+) terminal on your amplifier or
receiver must be connected to the red (+)
terminal on your speaker;the sameapplies
to the black (-) terminal.
• Connect one loudspeaker at a time to
ensure proper connection of left and right
channels.Makesure all wires are firmly
fastened.
• If you notice a high level of bassor central
imagefocus,double-checkyour connections
for proper polarity.
California
AWARNING:
This product can expose you to chemicals,
the state of California to cause
reproductive harm. Do not ingest.
For more info go to: www.P65warnings.ca.gov
is safe and secure.
Prop 65 Warning
which is known to
cancer birth defects
NEGATIVE TERMINAL
(BLACK)
9
CONNECT NEGATIVE WIRE
TO NEGATIVE TERMINAL OF
YOUR AMP OR RECEIVER
and other
POSITIVE TERMINAL
(RED)
9
CONNECT POSITIVE WIRE
TO POSITIVE TERMINAL OF
YOUR AMP OR RECEIVER
Questions or Comments?
We are here to help!
Phone: 1.718.535.1800
PyleUSA.com/ContactUs
www.PyleUSA.com