Epomaker RT80 Schnellstartanleitung Seite 4

REPLACING KEYCAPS
For a full guide on how to remove keycaps and switches scan the QR Code or type in your browser:
6..
https://epomaker.com/blogs/guides/diy-guide-how
Before installing switches, be sure the pins are clean and straight.
Included
Tools
Keycap
Puller
Switch Puller
Remove Switches
l. Grab your Switch Removal Tool and align the gripping teeth
vertically (on the Y-Axis) at the center Ofthe SWItch,as shown in
the example graphic above.
2. Grab the switch With the Switch puller and appy
the switch releases itself from the plate.
Using firrn but gentle force pull the switch
keyboard using a vertical motion.
Note: If the key doesn't work its possible you may have bent one Ofthe switches while installing it. pull the switch out and repeat the process.
Pins may be damaged beyond repair and need replacement if this process is not done correctly. Never apply excessive force when replacing
keycaps or switches. If you cannot remove or install keycaps or switches please contact customer service as soon as possible to avoid
damage to the keyboard due to operating errors.
AND SWITCHES
to-remove and-replace-your-mechanical-keyboard-switches
1
Mechanical
Switch
Example of a switch
as seen from top
after you remove the
keycap to prepare for
switch removal.
The Switch Puller tool aligns Vertically
unclip the plastic securing the switch to the plate.
Install Switches
1. Check that all the switch meta lic pins are perfectly straight and clean.
2. Align the switch vertically to have the Gateron logo facing north. The
pins should align themselves to the keyboard PBC.
pressure until 3. press the switch down until you hear a click. This means your switch
clips have attached themselves to the keyboard plate.
away from the 4. Inspect the switch to ensure it's properly attached to your keyboard,
and test it.
Push Straight
Down
Please be gentle. Be sure
the pins are aligned with
the slots.
Logo
EPOMAKER
Switch Shaft
to the Switch to
TECHNICAL ASSISTANCE
For technical assistance, please email to
support@epomaker.com with your purchase order number and
a detailed description of your issue.
We normally respond to enquiries within 24 hours. If you
purchased your keyboard from a distributor or not from any
official store of Epomaker, please contact them directly for any
additional help.
COMMUNITY FORUMS
Join our community and learn together with
other keyboard enthusiasts.
https://discord.gg/2q3Z7C2
https://www.reddit.com/r/EpomakerKeyboard/
WARRANTY
EPOMAKER's Warranty covers any factory defects that might
affect the proper functionality of your purchase. It doesn't
cover any damage that may occur from normal wear and tear.
f your product is defective we will send you a replacement
unit. Replacement units might require
defective unit back to Epomaker.
We provide a 1 year warranty for our products when bought
from Our website (EPOMAKER.com). Your item will not be
covered by your 1 year warranty if the inspection
sign of modification or changes unsupported
product, these include: Changing internal
Assembling and reassembling the product,
Batteries, etc.
We will ONLY cover the item if it is bought from our official
stores. You do not have a warranty with us if you bought the
item from another reseller or likewise. Please contact
that you bought your product from to resolve issues.
you to send the
shows any
by the original
components,
Replacing
the store