SOUNDMASTER RCD 1150 Bedienungsanleitung Seite 3

LISTENING
1. Slide the FUNCTION SWITCH (AM - FM - CD) to CD position."- -'is displayed.
2. Place the CD disc with label side facing up inside the CD compartment
the CD door.
3. After a few seconds, the total number of tracks will appear on the display.
4. Press to start playing and ac$ust the volume level,
on dsplay.
NOTE: I-Jse also this knob to suspend momentarily,
again to resume play
5. Press •to stop listening to the disc .
OTHER CD PLAYER
REW FWD. SKIP
- Press skip forward to the next track or repeatedly to skip several tracks.
- Press to beginning
tracks.
- Press and hold*
REPEAT PLAYBACK
During the CD playback mode, A single track or the whole CD can be repeated as
many times as you like.
Press PLAY MODE/PROGRAWCLOCK-ADJ.
The repeat indicator "REP" blinks.
Press PLAY MODEIPROGRAWCLOCK.ADJ.
repeat incicator "REP" lights up.
Press PLAY MODEÆPROGRAWCLOCK-ADJ.
The repeat indicator "M IX" lights up.
To cancel REPEAT Playback
Press PLAY MODE/PROGRAWCLOCK-ADJ.
indicator "REP" or "MIX" disappears from display. Repeat function is also cancelled
when the CD door is opened or turning off the unit.
PROGRAM PLAYBACK
To set your own musical program when the unit is STOP state.
1. Press button.
2. Press PLAY MODEIPROGRAWCLOCK-ADJ.,
seconds, and then "PROG" and "00" start blinking on LCD.
3. Select with
CLOCK-ADJ.
4. Repeat the above steps to program more tracks. A maximum
programmed in memory
"FIJ" for indicating.
5. Press PLAYJPAUSE
"and programmed
6. Press • to stop the disc. Press again to cancel the programmed
"PROG." icon will go off, display goes back to show the total number of tracks.
IMPORTANT NOTICE
Automatic standby mode
In a concern of saving energy, when playback has reached to the end and no control
is operated on the device for a period of 15 minutes, the unit will automatically
to Standby mode. To switch the unit ON again, press the ON 'OFF button.
MAINTENANCE
Cleaning
WARNING: Disconnect
- use a soft, dry, clean cloth. Regularly dust the vents at the back or sides.
- Using solvents, abrasive or alcohol-based
- If an object or liquid enters inside the appliance, unplug it immediately
checked by an authorized engineer.
TO THE CD
FUNCTIONS
SEARCH
of the track or press repeatedly to skip backward
or to search quickly within a track.
or your desired track, then press PLAY MODE/PROGRAW
to store your program in memory.
in a preferred
button
track number "XX" will show on display.
the unit from the mains supply
PLAYER
:
once to repeat your selected track.
twice to repeat the whole disc. The
three times to disc mixture playback.
button repeatedly
LCD shows "POI" indicator few
order. If the memory is MI, LCD shows
to start playing program
products risks damaging the appliance.
" and track no. will appear
">" will blink, press
until the repeat
of 20 tracks can be
mode, the "PROG"&
before cleaning.
and close
once
several
tracks, and
switch
and have it