Package Contents; Product Description; Precautions - Inpeak Powercrank Bedienungsanleitung

1. Package Contents

• INPEAK Power meter POWERCRANK SINGLE or TWiN2
installed on a bike crank.
• The card with device data and a PIN to access the mobile
application.
• Shortened manual.
• A set of stickers.
• Spare O-Ring.
• CR2032 battery.

2. Product description

INPEAK POWERCRANK is a device dedicated to measure-
EN
ment of power generated by the cyclist during a ride. Data
registered and processed by the INPEAK POWERCRANK
device are shared using the ANT + and Bluetooth Low
Energy protocol. The INPEAK POWERCRANK device is
compatible with bike computers and other mobile devices
supporting the ANT+ and/or Bluetooth Low Energy commu-
nication protocols (list of compatible devices is available at
https://help.inpeak.pl/en/).

3. Precautions

Please read these operating instructions carefully.
• Incorrect installation of the device may lead to accidents
and potential damage of property and / or personal injury.
If you have any doubts about the proper installation of the
product, we recommend that you ask a specialized bike
mechanic or service for help. Incorrect installation may
result in irreversible damage to the product that is not
covered by the warranty. Before installation, make sure
that the INPEAK POWERCRANK does not conflict with
other components of your bike during the crank rotation.
• The INPEAK POWERCRANK device should not be washed
with pressure washers generating high water pressure
that can irreversibly damage the device.
• For cleaning a crank with the INPEAK POWERCRANK
power meter do not use corrosive detergents that can
cause damage to the housing and electronics.
• Device operating time at low temperatures may be short-
er than when the device is operating in warm tempera-
tures.
20