Textron Ransomes LH Serie Sicherheits-, Betriebs- Und Wartungshandbuch Seite 28

7 operation
Ransomes Jacobsen grinding paste:
Grinding Paste
80 grit grinding paste, 4.5kg tin
120 grit grinding paste, 4.5kg tin
80 grit grinding paste, 9kg tin
120 grit grinding paste, 9kg tin
PROCCEDURE
1. Apply an even coat of backlapping compound to the entire length of each blade of the reel.
2. Start the tractor and set the tractor P.T.O. to allow reels to rotate at a slow speed.
3. Slowlyadjust the P.T.O. speed until the desired reel rotation speed is attained. It should be slow enough
so that the reel will not throw off the backlapping compound as it spins.
4. Once all the blades on the reel are uniformly sharp, shut off the engine and move the PTO to the off
position.
7. Wash all of the backlapping compound from all of the heads. Once they are thoroughly cleaned and dry,
apply a light film of oil to the cutting edges to help prevent rust.
8. After backlapping, the reel to bedknife adjustment should be made again.
en-28
Part Number
5002488
5002489
5002490
5002491