Control Panel; Fast Freeze Function; Daily Use; Freezing Fresh Food - AEG AGN2291 Benutzerinformation

56 www.aeg.com

3. CONTROL PANEL

Alarm Light
1
Fast Freeze Indicator
2
Fast Freeze Switch
3
Pilot Light
4
Temperature Regulator
5
3.1 Switching on
Insert the plug into the wall socket.
Turn the Temperature regulator clock-
wise to a medium setting.
The Pilot light and the Alarm light will
light up.
3.2 Switching off
To turn off the appliance, turn the Tem-
perature regulator to the "0" position.
3.3 Temperature regulation
The temperature is automatically regula-
ted.
To operate the appliance, proceed as
follows:
• turn the Temperature regulator to-
ward lower settings to obtain the mini-
mum coldness.

4. DAILY USE

4.1 Freezing fresh food

The freezer compartment is suitable for
freezing fresh food and storing frozen
and deep-frozen food for a long time.
To freeze fresh food activate the Fast
Freezing function at least 24 hours be-
fore placing the food to be frozen in the
freezer compartment.
Place the fresh food to be frozen in the
top compartment.
1 2 3 4 5
• turn the Temperature regulator to-
ward higher settings to obtain the
maximum coldness.
The intermediate position is usually the
most suitable.
However, the exact setting should be
chosen keeping in mind that the temper-
ature inside the appliance depends on:
• room temperature
• how often the door is opened
• the quantity of food stored
• the location of the appliance.

3.4 Fast Freeze function

To activate the Fast Freeze function,
press the Fast Freeze switch.
The Fast Freeze light will light up.
3.5 Excessive Temperature
Alarm
In the event of an abnormal temperature
rise inside the freezer (e.g. power cut)
alarm light comes on.
When normal conditions are restored
the alarm light will switch off automati-
cally.
The maximum amount of food that can
be frozen in 24 hours is specified on the
rating plate, a label located on the inside
of the fridge.
The freezing process lasts 24 hours: dur-
ing this period do not add other food to
be frozen.
After 24 hours, when the freezing proc-
ess is completed, deactivate the Fast
Freezing function (see "Fast Freezing
function").