Herunterladen Inhalt Inhalt Diese Seite drucken
Verfügbare Sprachen

Verfügbare Sprachen

P
4
T
S
E
-
D
2
P 4
4 T
T S
S E
E -
- D
D 2
2
P
FCC Information and Copyright
This equipment has been tested and found to comply with the limits of a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are
designed
to
provide
reasonable
protection
against
harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. There is no guarantee that interference will not occur in
a particular installation.
The vendor makes no representations or warranties with respect to the
contents here of and specially disclaims any implied
of
warranties
merchantability or fitness for any purpose. Further the vendor reserves
the right to revise this publication and to make changes to the contents
here of without obligation to notify any party beforehand.
Duplication of this publication, in part or in whole, is not allowed without
first obtaining the vendor's approval in writing.
The content of this user's manual is subject to be changed without notice
and we will not be responsible for any mistakes found in this user's
manual. All the brand and product names are trademarks of their
respective companies.
i
Inhaltsverzeichnis
loading

Inhaltszusammenfassung für Biostar P4TSE-D2

  • Seite 1 FCC Information and Copyright This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits designed provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
  • Seite 2: Inhaltsverzeichnis

    LAYOUT OF P4TSE-D2 ................1 COMPONENT INDEX................2 ENGLISH....................3 P4TSE-D2 Features ....................3 Package contents.......................5 How to set up Jumper....................5 CPU Installation......................5 DDR DIMM Modules: DDRA1, DDRB1...............6 Installing DDR Module ....................7 Jumpers, Headers, Connectors & Slots ..............7 DEUTSCH....................14 Die Spezifikationen von P4TSE-D2 .................14 Verpackungsinhalt ....................16...
  • Seite 3: Layout Of P4Tse-D2

    Layout of P4TSE-D2 NOTE: ●represents the first pin.
  • Seite 4: Component Index

    Component Index A. Power Source Selection for Keyboard and N. Communication Network Riser Slot (CNR1) Mouse (JKBV1) O. System FAN Header (JSFAN1) B. Power Source Selection for USB P. Front USB Header (JUSB2) (JUSBV1) Q. Front USB Header (JUSB3) C. Back Panel Connector R.
  • Seite 5: English

    English P4TSE-D2 Features A. Hardware Provides Socket-478. Supports the Intel Pentium 4 processor to 3.2GHz. Front Side Bus at 400/533/800MHz. Supports Hyper-Threading Technology. Supports Northwood CPU. (Willamette not supported) Chipset North Bridge: Intel 865PE. South Bridge: Intel ICH5. Main Memory Supports one or two 64-bit wide DDR data channels with 1 DIMMs per-channel.
  • Seite 6: Bios & Software

    LAN (optional) Chip: RTL8100C/ RTL8110S(B). Supports 10 Mb/s, 100 Mb/s and 1000Mb/s auto-negotiation operation. Half/ Full duplex capability. Supports ACPI, PCI power management. On Board AC’97 Sound Codec Chip: CMI9739A. Compliant with AC’97 specification. AC97 2.2 interface. Supports 6 channels. On Board Peripherals a.
  • Seite 7: Package Contents

    Package contents HDD Cable X 1 FDD Cable X 1 User’s Manual X 1 Fully Setup Driver CD X 1 StudioFun! Application CD X 1 (optional) USB 2.0 Cable X1 (optional) S/PDIF Cable X 1 (optional) Rear I/O Panel for ATX Case X 1 Serial ATA Cable X 1 (optional) Serial ATA Power Switch Cable X 1 (optional) How to set up Jumper...
  • Seite 8: Ddr Dimm Modules: Ddra1, Ddrb1

    Step1 Step2 Step3 Step4 CPU Fan Header: JCFAN1 Assignment Ground +12V JCFAN1 FAN RPM rate Sense System Fan Header: JSFAN1 Assignment Ground JSFAN1 +12V FAN RPM rate Sense DDR DIMM Modules: DDRA1, DDRB1 Dual Channel Guidelines Matched DIMM configuration in each channel Same Density (128MB, 256MB, 512MB, 1GB, etc.) !"...
  • Seite 9: Installing Ddr Module

    When not using DDR400, best performance obtained with Symmetrical DIMM population and matched double-sided DIMMs !" Dual Channel Configuration Table • Dual Channel Configuration Table DIMM Slot DDRA1 DDRB1 System Density Fully Loaded Config 128MB -- 1GB 128MB -- 1GB 256MB -- 2GB DRAM Access Time: 2.5V Unbuffered/ no registered (without ECC) DDR SDRAM PC2100/ PC2700/ PC3200 Type required.
  • Seite 10 Peripheral Component Interconnect Slots: PCI 1-5 This motherboard is equipped with 5 standard PCI slots. PCI stands for Peripheral Component Interconnect, and it is a bus standard for expansion cards. This PCI slot is designated as 32 bits. Accelerated Graphics Port Slot: AGP1 Your monitor will attach directly to that video card.
  • Seite 11 Front Panel Connector: JPANEL1 PWR_LED ON/OFF JPANEL1 (+) (-) HLED Assignment Function Assignment Function Speaker Sleep Control Sleep Connector Button Ground Speaker Power LED (+) POWER HDD LED (+) Hard Drive Power LED (+) HDD LED (-) Power LED (-) Ground Reset Power Button...
  • Seite 12 Assignment Assignment +12V Ground JATXPWR2 +12V Ground Power Source Selection for Keyboard/ Mouse: JKBV1 JKBV1 Assignment Description +5V for keyboard and mouse Pin 1-2 close PS/2 Mouse and PS/2 Keyboard are powered with +5V standby voltage +5V Standby Voltage Pin 2-3 close Note: In order to support this function “Power-on system via keyboard and mouse”, “JKBV1”...
  • Seite 13 Note: In order to support this function “Power-on system via USB device”, “JUSBV1/JUSBV2/ JUSBV3_4” jumper cap should be placed on pin 2-3 respectively. Clear CMOS Jumper: JCMOS1 JCMOS1 Assignment Normal Operation (default) Pin 1-2 Close Clear CMOS Data Pin 2-3 Close ※...
  • Seite 14 CD-ROM Audio-In Header: JCDIN1/ JCDIN2 Assignment Left Channel Input Ground Ground JCDIN1/ JCDIN2 Right Channel Input Front Panel Audio Header: JAUDIO1 JAUDIO1 Assignment Assignment Mic In/ Center Ground Mic Power/ Bass Audio Power Right Line Out/ Speaker Out Right Line Out/ Speaker Out Right Right Reserved Left Line Out/ Speaker Out...
  • Seite 15 Front USB Header: JUSB2/3 Assignment Assignment +5V(fused) +5V(fused) USB- USB- USB+ USB+ JUSB2/3 Ground Ground Back Panel Connectors JRJ45USB1 JKBMS1 JPRNT1 PS/2 (optional) Mouse JUSB1 Line In Parallel Port Speaker Out MIC In PS/2 COM1 COM2 Keyboard JCOM1 JCOM2 JAUDIO 6 Channel Speakers Line In/ Rear Speaker Speaker Out...
  • Seite 16: Deutsch

    Deutsch Die Spezifikationen von P4TSE-D2 A. Hardware Uterstützung für Sockel 478. ® Unterstützung für den Intel Pentium 4 Prozessor bis zu 3.2GHz. FSB mit 400/533/800MHz. Uterstützung für die Hyper-Threading Technologie. Unterstützung für Intel CPU Northwood. (Willamette wird nicht untergestützt) Chipsatz Die Northbridge: Intel 865PE.
  • Seite 17 LAN (optional) Chip: RTL8100C/ RTL8110S(B). Unterstützung für 10Mb/s ,100 Mb/s und 1000Mb/s Auto-Negotiation. Halb/Voll-Duplex Fähigkeit. Unterstützung für ACPI, PCI Power Management. Onboard AC’97 Sound Codec Chip: CMI9739A. Entspricht der Spezifikation von AC’97. AC97 2.2 Interface. Unterstützung für 6-Kanal. Onboard-Peripheriegeräte a. Rückwand 2 serielle Schnittstellen.
  • Seite 18: Verpackungsinhalt

    Verpackungsinhalt HDD Kable X 1 FDD Kable X 1 Benutzer Handbuch X1 Treiber CD für Installation X1 StudioFun! Anwendung CD X 1 (optional) USB 2.0 Kable X1 (optional) S/PDIF Kable X 1 (optional) I/O-Rückwand für ATX Gehäuse X 1 Serial ATA Kable X 1 (optional) Serial ATA Netzschalter Kable X 1(optional) Einstellung der Jumper Die Abbildung verdeutlicht, wie Jumper eingestellt werden.
  • Seite 19: Ddr-Dimm-Modules: Ddra1, Ddrb1

    Schritt 1 Schritt 2 Schritt 3 Schritt 4 CPU-Lüfter Header: JCFAN1 Beschreibung Masse +12V JCFAN1 pro Minute Lüfter Umdreh. Sensor System-Lüfter Header: JSFAN1 Beschreibung Masse JSFAN1 +12V pro Minute Lüfter Umdreh. Sensor DDR-DIMM-Modules: DDRA1, DDRB1 Dual-Kanal Richtlinie Entsprechende DIMM-Konfiguration für pro Kanal Gleiches Dichte (128MB, 256MB, 512MB, 1GB, etc.) !"...
  • Seite 20: Installation Von Ddr-Modul

    Optimale Plattform-Performance mit Dual-Kanal, DDR400, entsprechende DIMMs Voll-Beladete Konfiguration: Einzeln- oder doppeltseitig DIMMs sind !" möglich When not using DDR400, best performance obtained with !" Symmetrische DIMM-Population und entsprechende doppeltseitige DIMMs !" Dual-Kanal Konfiguration Matrix • Dual-Kanal Konfiguration Matrix DIMM-Slot DDRA1 DDRB1 System Dichte...
  • Seite 21 (sekundär). Die IDE-Anschlüsse können eine Master- und eine Slave-Festplatte verbinden, so dass bis zu 4 Festplatten angeschlossen werden können. Die erste Festplatte sollte immer an IDE1 angeschlossen werden. Peripheral Component Interconnect Slots: PCI 1-5 Dieses Motherboard ist mit 5 standardmäßigen PCI-Slots ausgestattet. PCI steht für Peripheral Component Interconnect und bezieht sich auf einem Busstandard für Erweiterungskarten, älteren...
  • Seite 22 Anschlüsse Front Panel Connector: JPANEL1 PWR_LED ON/OFF JPANEL1 (+) (-) HLED Belegung Funktion Belegung Funktion Schlaf- Kontroll Schlaf- Lautsprecher- Knopf Kein Masse Anschluss Kein Kein Kein Lautsprecher Power LED (+) POWER HDD LED (+) Festplatte Power LED (+) HDD LED (-) Power LED (-) Masse Rückstell-...
  • Seite 23 Belegung Belegung +12V Masse JATXPWR2 +12V Masse AUDIO DJ Anschluss: JDJ1 Belegung Belegung SMBDATA SMBCLK INT_B Schlüsse JDJ1 ATX_PWROK Auswahl von Stromsmodi für Tastatur/ Maus: JKBV1 JKBV1 Pin-Belegung Beschreibung +5V für Tastatur und Maus Pin 1-2 geschlossen Durch +5V reservierte Spannung für +5V reservierte PS/2-Maus und PS/2-Tastatur zum Spannung...
  • Seite 24: Prozeduren Zum Löschen Des Cmos

    Auswahl von Stromsmodi für USB: JUSBV1/ JUSBV2/ JUSBV3_4 JUSBV1/JUSBV2/ Pin-Belegung Beschreibung JUSBV3_4 JUSBV1: 5V für USB-Port von JUSB1 JUSBV2: 5V für USB-Port von JRJ45USB1 JUSBV3_4: 5V für USB-Port von JUSB2/3 Pin 1-2 geschlossen JUSBV1: 5V reservierte Spannung für JUSB1 zum Erwecken JUSBV2: 5V reservierte Spannung für JRJ45USB1 zum Erwecken +5V reservierte...
  • Seite 25 Game Header: JGAME1 JGAME1 Belegung Belegung Joystick B Knopf 1 Joystick A Knopf 1 Joystick B Koordierung X Joystick A Koordierung X MIDI Ausgabe Masse Joystick B Koordierung Y Masse Joystick B Knopf 2 Joystick A Koordierung Y MIDI Eingabe Joystick A Knopf 2 Kein CD-ROM Audio-In Header: JCDIN1/ JCDIN2...
  • Seite 26 Front Panel Audio Header: JAUDIO1 JAUDIO1 Belegung Belegung Mikrofon-Eingang/ Masse Zentrum Mikrofon-Betriebsspannung Audio-Betriebsspannung /Bass Audio-Signal des rechten Audio-Signal des rechten Kanals zur Kanals zur Vorderseite / Vorderseite / Lautsprecher-Signal Lautsprecher-Signal des rechten des rechten Kanals zur Vorderseite Kanals zur Vorderseite Reservieret für spät.
  • Seite 27 Anschlüsse für die Rückwand 6 Kanal Lautsprecher Line-In/ R cklautsprecher ü Lautsprecher Ausgang/ (L/R) Fornt-Lautsprecher Mikrofon Eingang/ (L/R) Zentrallautsprecher & Bass...
  • Seite 28: Warpspeeder

    WarpSpeeder Introduction [ WarpSpeeder™ ], a new powerful control utility, features three user-friendly functions including Overclock Manager, Overvoltage Manager, and Hardware Monitor. With the Overclock Manager, users can easily adjust the frequency they prefer or they can get the best CPU performance with just one click. The Overvoltage Manager, on the other hand, helps to power up CPU core voltage and Memory voltage.
  • Seite 29: Installation

    Installation Execute the setup execution file, and then the following dialog will pop up. Please click “Next” button and follow the default procedure to install. When you see the following dialog in setup procedure, it means setup is completed. If the “Launch the WarpSpeeder Tray Utility” checkbox is checked, the Tray Icon utility and [WarpSpeeder™] utility will be automatically and immediately launched after you click “Finish”...
  • Seite 30: Usage

    Usage The following figures are just only for reference, the screen printed in this user manual will change according to your motherboard on hand. [WarpSpeeder™] includes 1 tray icon and 5 panels: 1. Tray Icon: Whenever the Tray Icon utility is launched, it will display a little tray icon on the right side of Windows Taskbar.
  • Seite 31 This utility is responsible for conveniently invoking [WarpSpeeder™] Utility. You can use the mouse by clicking the left button in order to invoke [WarpSpeeder™] directly from the little tray icon or you can right-click the little tray icon to pop up a popup menu as following figure.
  • Seite 32 3. Voltage Panel Click the Voltage button in Main Panel, the button will be highlighted and the Voltage Panel will slide out to up as the following figure. In this panel, you can decide to increase CPU core voltage and Memory voltage or not. The default setting is “No”.
  • Seite 33 4. Overclock Panel Click the Overclock button in Main Panel, the button will be highlighted and the Overclock Panel will slide out to left as the following figure.
  • Seite 34 Overclock Panel contains the these features: “–3MHz button”, “-1MHz button”, “+1MHz button”, and “+3MHz button”: provide user the ability to do real-time overclock adjustment. Warning: Manually overclock is potentially dangerous, especially when the overclocking percentage is over 110 %. We strongly recommend you verify every speed you overclock by click the Verify button.
  • Seite 35 “Auto-overclock button”: User can click this button and [ WarpSpeeder™ ] will set the best and stable performance and frequency automatically. [ WarpSpeeder™ ] utility will execute a series of testing until system fail. Then system will do fail-safe reboot by using Watchdog function. After reboot, the [ WarpSpeeder™ ] utility will restore to the hardware default setting or load the verified best and stable frequency according to the Recovery Dialog’s setting.
  • Seite 36 5. Hardware Monitor Panel Click the Hardware Monitor button in Main Panel, the button will be highlighted and the Hardware Monitor panel will slide out to left as the following figure. In this panel, you can get the real-time status information of your system. The information will be refreshed every 1 second.
  • Seite 37 Note: Because the overclock, overvoltage, and hardware monitor features are controlled by several separate chipset, [ WarpSpeeder™ ] divide these features to separate panels. If one chipset is not on board, the correlative button in Main panel will be disabled, but will not interfere other panels’ functions.
  • Seite 38: Studiofun! Tm (Optional)

    StudioFun! (Optional) Introduction StudioFun! is a media-player based on optimized GNU/Linux distribution to bring a “Room Theater” experience into life. It plays DVD, VCD, MP3, Audio CD and other multimedia. Furthermore, Users can take snapshots of video and customize the saved images as screensavers or photo slideshows. Of course, the images can be stored in USB mass storage devices like flash disks and USB floppy disks.
  • Seite 39: Trouble Shooting

    Trouble Shooting PROBABLE SOLUTION No power to the system at all Power light don’t * Make sure power cable is securely plugged in illuminate, fan inside power supply does not turn * Replace cable on. Indicator light on keyboard does not turn on * Contact technical support PROBABLE SOLUTION...
  • Seite 40: Problemlösung

    Problemlösung MÖGLICHE URSACHE LÖSUNG Das System hat keine Spannungsversorgung. * Versichern Sie sich, dass das Stromkabel richtig Die Stromanzeige leuchtet nicht, der Lüfter im angebracht ist Inneren Stromversorgung wird nicht * Ersetzen Sie das Stromkabel eingeschaltet. Tastaturleuchten sind nicht an. * Wenden Sie sich an Ihre Kundendienststelle MÖGLICHE URSACHE LÖSUNG...
  • Seite 41 08/13/2003...

Inhaltsverzeichnis