Durabase wm-1020 slim Bedienungsanleitung Seite 48

FAILURE
CODE
Err 02
Err 03
(*) See the section regarding the maintenance and cleaning of your machine.
FAILURE
INDICATOR
The program
ready light
blinks.
The start/pause
light and
program ready
light blinks .
PROBABLE
FAILURE
The water level
in your machine
is below heater.
The pressure of
your water
supply may be
low or locking.
The pump has
failed or the
pump filter is
obstructed.
108
THE PROCESS
TO BE DONE
Turn on the tap
to the end.Water
may be cut,
check it.If the
problem is still
continuing,your
machine will
automatically
stop after a
while.Unplug
your machine,
turn off the tap
and apply to the
nearest
authorized
service.
Clean the pump
filter.If the
problem
persists,apply to
the nearest
authorized
service.(*)