TecTake 401542 Bedienungsanleitung Seite 16

To turn off,
release the on / off button (2).also pls remove the EK9 swtich(25).
During the work, make sure that the blade never comes in contact with stones, wood,
son of iron or other objects.
Working on a lawn dry for best results.
If you feel that the camera begins to cut less, recharge the battery.
After each job, clean the blade (5) and grease it lightly.
Use with telescopic handle
For convenience, the guide head can be rotated and locked on three different notches.
The telescopic handle (18) comprises a connecting cable is used to control the shear
from the handle, plug the cable into the socket behind the handle of the shears. (B6)
Go the shears on the grass in regular motion, with the wheels, moving always from the
sidewalk to the grass.
To turn, push the safety (20) to the inside on the right or the left side of the handle (19),
then press the on / off switch (21). (B11)
To turn off, release the on / off button (2).
Cut boxwood bushes and
CAUTION: telescopic handle must not be mounted when the machine is used
as a shear box.
To turn, push the safety (3) to the inside on the right or the left side of the handle and
press the on / off button (2). (B11)
To turn off, release the on / off button (2).
This cutter can be used only prune boxwood shrubs or small.
Max. branches with full battery: 5mm
Fatigue-free working
The cutter should be slightly inclined towards the bush to cut. First cut the sides from
top to bottom and the top. Identify any foreign objects hidden on or inside the bush,
and remove them.
Take a break whenever you feel tired.
.
16