Merach R05 Benutzerhandbuch Seite 18

Step 7: Assemble the Pedals
A. Use the Multifunctional Wrench (#T1), Hexagon-head Bolt (#27), and Hexagon
Thin Nuts(#23) to install the Pedal Limit Shaft Set (#A6) on the Main Frame (#A1)
and then lock it.
Note: The Hexagon-head Bolt (#27) and Hexagon Thin Nuts(#23) are pre-assembled on the
Main Frame (#A1).
B. Use the Multifunctional Wrench (#T1), Hexagon-head Bolt (#28), and Pedal
Extension Tube (#86) to install the Left Pedal(#A7) and Right Pedal(#A8) on the
Main Frame (#A1) and lock it.
Note: The groove of the Pedal Extension Tube (#86) faces inward.
A7
28
Assembly Instruction
Installation Tips:
Please loosen the per-assembled
Bolt(#27) and Nuts(#23) from the
bottom of Main Frame(#A1) firstly.
A6
23
27
A8
86
86
A6
A1
014
28
EN