Merach R05 Benutzerhandbuch Seite 15

Step 4: Fix the Monitor
A. Connect the wire of the Monitor(#A9) and Main Frame(#A1) as shown below,
and then put the wire into the back hole of Monitor(#A9).
B. Install the Monitor(#A9) onto the Main Frame(#A1) with Multi-function Cross
Wrench(#T3) and four Cross Recessed Pan Head Bolts(#38), and tighten it.
C. Turn the Monitor(#A9) over direction as shown, to avoid damaging the Monitor
(#A9) when it be placed vertically.
Note: The 4 four Cross Recessed Pan Head Bolts(#38) are pre-assembled onto the back of
Monitor(#A9).
EN
Assembly Instruction
A1
A9
Installation Tips:
Please unscrew four per-assembled
38
Bolts(#38) from the back of Monitor
(#A9) firstly.
011