Merach R05 Benutzerhandbuch Seite 16

Step 5: Install the Seat Cushion and Rear Foot Tube
A. Install the Rear Foot Tube Assembly(#A5) on the Rear Foot Tube(#A10) with
two Mushroom Head Square Neck Bolts(#29), two Flat Washers(#48), two Hexagon
Domed Cap Nuts(#26) and the Multifunctional Wrench(#T1).
B. Slide the Seat Cushion (#A4) into the Rail Bar(#A2). (Please install the Seat
Cushion (#A4) in the correct direction as shown).
C. Using the Allen Key (#T2), two Hexagon Socket Flat Round Head Bolts(#30), two
Hexagon Socket Flat Round Head Bolts (#32), Spring Washers (#49), and Flat
Washers (#47) install the Rear Foot Tube (#A5) on the Rail Bar (#A2) and lock it.
Note: The two Hexagon Socket Flat Round Head Bolt(#30) is pre-assembled on the Rail Bar
(#A2).
A2
A4
26
48
Assembly Instruction
A5
A1 0
29
012
30
47
49
32
Installation Tips:
Please unscrew 2 per-assembled
Bolts(#30) from the left and right
sides of Rail Bar(#A2) firstly.
3 0
A5
EN