vlahova RB9359 Benutzerhandbuch Seite 12

The setting sequence is shown as follow: 12/24Hour, RCC on/off, Time Zone, Weekday
⚫
Language, Hour, Minute, Second, Year, Month, Day, Temperature Unit, Alarm sound duration.
There are 10 languages for day of week: German, English, French, Italian, Dutch, Spanish,
⚫
Danish, Czech, Polish, Swedish
Note:
1. Second adjusted to zero only.
2. The time setting mode will automatically exit in 15 seconds without any adjustment.
3. Time Zone: If you in the area couldn't receive RC-DCF frequency signal, the time zone should be
set to 0. Time Zone is used in areas which DCF frequency signal can be received but the time
zone is different from German Time.
4. Alarm sound duration: there are two options available, "1 minute" and "2 minutes".
4.3 Daily Alarm Function:
Press " MODE" button select to view alarm Time, "ALARM TIME" flashes on the display
⚫
When viewing the alarm time, hold "MODE" button for 3 seconds to enter alarm time setting.
⚫
Press "▲" or "▼"button to adjust the alarm time. Press "MODE" button to confirm the setting.
4.3 Snooze Alarm Function:
Press " " button to activate or deactivate the alarm. If the alarm function is is activated,
⚫
alarm icon " " will display on LCD.
When alarm sounds, press any button to stop the alarm. If no buttons are pressed, the alarm
⚫
will stop automatically after 2 minutes or 1 minute depending on the alarm duration setting.
5. Thermometer
If the temperature is out of the measurable range, LL.L (beyond the minimum temperature) or
⚫
HH.H (beyond the maximum temperature) will be shown on the LCD.
If the humidity is lower than 20%,
⚫
higher than 99%.
6. Precautions
The clock loses its time information when the battery is removed.
⚫
Do not expose it to direct sunlight, heavy heat, cold, high humidity or wet areas
⚫
Never clean the device using abrasive or corrosive materials or products. Abrasive cleaning
⚫
agents may scratch plastic parts and corrode electronic circuits
will be shown on the LCD, and display 99% when it's
12