Preparing The Remote Controller - DJI Mavic Air Kurzanleitung

4. Preparing the Remote Controller

Unfold the antennas and
mobile device clamps,
then attach the control sticks.
Strong
Set the antennas parallel to each other
Ensure the control sticks are firmly mounted.
The remote controller cable with the Lightning Connector is mounted by default. Use the
appropriate cable for your mobile devide to connect to the remote controller.
When using an iPad or tablet, use the USB port on the remote controller.
Do not use the Micro USB and the USB ports simultaneously for linking video. Disconnect one
port from the video-linking device if the other port is in use.
5. Preparing for Takeoff
Power on the remote
controller
Use your DJI account to activate the aircraft. Activation requires an internet connection.
Internet
6
Place one end of the remote
controller cable to the end
of the slot on the side of the
remote controller.
Weak
Power on the aircraft
1
Attach your mobile
device within the clamps.
Optimal Transmission Range
DJI GO 4
Launch the DJI GO 4 app
App