Technical Changes - Gce Lab 3100 Gebrauchsanweisung

DANGER!
• The system must be made unpressurized before installation begins. Depending on the gas
type, residual gases in the pipes must be let off safely. Danger of fire, explosion or poisoning!
10. MAINTENANCE / DISPOSAL OF WASTE
10.1. MAINTENANCE
All parts coming into contact with oxygen must be absolutely free of oil and grease. Flame
arresters FS 400 for C
For safety reasons, repairs may only be carried out by the manufacturer with genuine
replacement parts. The fittings are to be checked annually by the manufacturer for functional
and operational reliability. GCE recommends that a maintenance contract is taken out. Please
contact the manufacturer.
10.2. DISPOSAL OF OLD PARTS
Old parts are waste "if the owner has the desire to dispose of this safely". Waste must be
forwarded for "proper disposal in order to maintain general welfare, in particular to protect
the environment". For this reason, old parts must therefore be disposed off in accordance with
local laws on the avoidance and disposal of waste or forwarded for recycling. Municipal and
community-owned collection points for special waste or enterprises specialising in the disposal
of old parts will accept the old parts.
In accordance to Article 33 of REACH GCE, s.r.o. as responsible manufacturer shall inform all
customers if materials containing 0.1% or more of substances included in the list of Substance
of Very High Concern (SVHC). The most commonly used brass alloys used for bodies and other
brass components contain 2-3% of lead (Pb), EC no. 231-468-6, CAS no. 7439-92-1. The lead will
not be released to the gas or surrounding environment during normal use. After end of life the
product shall be scrapped by an authorized metal recycler to ensure efficient material handling
with minimal impact to environment and health.
To date we have no information that indicates that other materials containing SVHC of
concentrations exceeding 0.1% are included in any GCE product.
11. WARRANTY
The warranty provisions are included in the GCE Group General Business Terms and Conditions.
See point 21. – 36
Please, download this document directly from the GCE website:
https://www.gcegroup.com/en/general-terms-and-conditions

12. TECHNICAL CHANGES

Technical changes are subject to change without further notice.
MANUFACTURER:
GCE s.r.o.
Zizkova 381
583 01 Chotebor
Czech Republic
H must undergo an annual inspection by an expert.
2 2
Tel : +420 569 661 111
Fax : +420 569 661 602
http://www.gcegroup.com
© GCE s.r.o.