Technical Specifications - Remco Rmt-Bl-01-Kit-Ef-Cha Montageanleitung

Things to consider:
Please read this manual. Please provide this manual to the new owner if you chose
to sell your Bike Lift Repair Stand.
Before use, ensure that the Bike Lift is not touching any obstacles and that no
obstacles are in its path. Make sure all cords and attachments are long enough to
accommodate the full range of travel.
Before operating the Bike Lift with a bicycle held in a clamp make sure that there
are no obstacles in either the bike's or the Bike Lift's path.
When lowering the Bike Lift take care that the bike is not forced into the ground.
Keep children away from the Bike Lift. There is risk of injury, electric shock, and
unintended operation.
Do not Climb on the Bike Lift. Do not use it for purposes other than raising and
lowering a bicycle.
Do not open or modify any of the components, including the lifting column, control
box housing, or display. Doing so risks electric shock and voids any warranty
claims.
Liability:
The Bike Lift is powered by an electric motor and is designed for use in dry interior
work environments only.
Please be responsible and use the Bike Lift as intended.
Under no circumstances does the manufacturer accept warranty claims or liability
claims for damage caused by improper use or handling of the Bike Lift.

Technical Specifications:

Weight capacity: 100 lb. // 45.36kg
Travel: 25.6" ± 0.4" // 650mm ± 10mm
Min Height: 34" ± 0.25" // 866mm ± 7mm
Max height: 59.7" ± 0.35" // 1516mm ± 8mm
Speed: 1.6" per second // 40mm per second,
unloaded
Self Locking Load: 1000N
Storage and transport temperature: 14' ~ 158' // -10'C
~ 70'C
Input: 100-240V, 50/60Hz, 150W
Output: 24V, 5A for M1 port
Working environment: Indoor, altitude below 1000m
Noise Level: ≤ 50 dB
Duty Cycle: Max 2 minutes operation/ Min 18
minutes of rest after continuous use at full load
4