Adjusting The Cover - Circor Rtk Sr 1000 L Installations- Und Betriebs-Anleitung

Einbau- und Betriebsanleitung
Installation and Operating instructions
Instructions de montage et de service

8.4 Adjusting the cover

7 If the drive size is relatively small compared to the flow rate the regulator may begin to swing. Any swinging clan be prevented through the
use of covers. There are three types of covers.
8 Remove the O-ring from the OUT1 output and install the corresponding cover. After attaching the cover set the O-ring back. Be sure no
foreign objects enter the input. Figure 17
9 If swinging continues after inserting the cover, please contact Regeltechnik Kornwestheim or a suitable representative.
Figure 16
Drive size
90 cm³ or less
90 cm³ to 180 cm³
180 cm³
Figure 17
6139-8010
Cover size
ø1
ø2
none
07/2018