tepro BELIZE Bedienungsanleitung Seite 17

Step 5
Secure the roof textile to the poles using
the Velcro fasteners.
Step 6
Pull the support legs out to the desired
length.
Release the ball stops by pressing on
the ball and sliding the parts together or
pulling them apart. The ball stops must
click into place audibly.
Step 7
Fix the support legs using pegs.
Step 8
Tie the tension ropes to the loops located
at the corners of the roof textile.
Tie the ends of the tension ropes to every
peg.
Pull the tension ropes at an angle of
approx. 45° tightly to the ground.
Hammer in the peg at the appropriate
point. In doing so, make sure to maintain
good tension.
The gazebo can be disassembled again in
the reverse order.
t
17