Electric Connection Of The Travel Vision R7 - Travel Vision R7 80 Benutzerhandbuch

3.4 Electric connection of the Travel Vision R7 ®
The system is connected using a coaxial cable. The coaxial cable is mounted between the antenna unit located
outside and the receiver/TV located inside.
The Travel Vision R7 ® operates on battery power. The required 230V-24V power adapter for charging is
supplied.
By default, The Travel Vision R7 ® is suited for 1 receiver with unlimited channel reception from the chosen
satellite.
R7
Connection procedure:
Press the F-connector on the other end of the coaxial cable over the connector of the "Antenna In" of your
receiver/TV, and hand-tighten both items.
The system is now ready for use.
Coax
Firmly press the F-connector of the coaxial cable over the
connector located on the bottom of the dish unit and hand-
tighten it.
Receiver/TV
Page 8