DigiTrace RAYSTAT-ECO-10 Handbuch Seite 12

3. Parameters
The first parameter to show up during Set-up mode is the Set Point. Other
parameters, their default, minimum and maximum values are shown in the
below table:
Parameter
Set Point (°C)
Min. Expected Ambient
2
Pipe Size
Heater Operation if
Sensor Error
Voltage Free Operation
1
Min. Expected Ambient Temp. is the temperature whereby the heating
cable is energized for 100%.
Min. Expected Ambient Temp. can only be set in steps of 10 K.
Min. Expected Ambient = Low Temp. Alarm.
2
Select Pipe Size Diameter:
3 for pipes ≥ 2 inch.
2 for pipes ≥ 1 inch.
1 for pipes < 1 inch.
12
Default
Value
5
1
(°C) –20
1
1
0
Displayed Min.
Code
0 (OFF)
0 (NO)
Max.
0 30
–30 0
1 3
1 (ON)
1 (YES)