Cleaning And Maintenance; Technical Data; Noise - Powerplus Powdpg75380 Bersetzung Der Originalbetriebsanleitung

11 CLEANING AND MAINTENANCE

▪
Check your machine regularly before starting the work.
▪
Damaged cutting blades have to be repaired or exchanged by a qualified service man
before working with the machine
▪
After each cutting operation, clean the cutting blade with a soft brush and cloth with
lubricating fluid oil and spray a thin layer of fluid protective oil on the completes blade.
▪
Always keep the ventilation slots in motor housing clean
▪
Never clean or spray a machine with water .clean the motor housing only with a moist
cloth and never apply detergents or solvents! These could ruin the plastic parts of the
machine. Finally, dry the motor housing carefully.
▪
Store the machine with the supplied protection cover.
▪
Only use original accessories and spare parts.

12 TECHNICAL DATA

Type
Voltage
Blade length
Cutting length
Cutting capacity
No load speed
Telescopic length

13 NOISE

Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
Acoustic power level LwA
ATTENTION! Wear hearing protection when sound pressure is over 85 dB(A).
aw (Vibration)
Copyright © 2025 VARO
POWDPG75380
POWDPG75380
40V
600 mm
510 mm
20 mm
1400 /min
2.1m to 2.7m
77 dB(A)
91 dB(A)
1,3 m/s²
P a g e | 9
EN
K = 1,5 m/s²
www.varo.com