Huffy In-Line Bedienungsanleitung Seite 8

PUSH BUTTON Folding System
1
2
C
8
THIS SCOOTER IS SHIPPED
PRE-ASSEMBLED.
Follow the instructions below to setup the
scooter .
1
Open/Loosen Quick Release Lock
2
Press the Release Button
A
steering head UP until it locks into the verti-
cal position
4
4 CLOSE Quick Release Lever
securely - Tightening Nut
A
• The Quick Release Lock
be suffi ciently tightened to hold the unit in the
upright position .
• Failure to obey this warning may cause the
handlebar to fold while riding, and may cause
serious injury to the rider or others .
3 .
B
WARNINGS:
A .
B
and unfold
3
A
fully and
C as needed .
A and Nut C MUST