Fault
No output voltage at the auxiliary
output.
Warranty
The statutory warranty period applies. If the prod-
uct is defective, please contact your retailer or the
manufacturer's branch in your country (see
dometic.com/dealer).
For repair and warranty processing, please include
the following documents when you send in the
product:
• A copy of the receipt with purchasing date
• A reason for the claim or description of the fault
Note that self-repair or nonprofessional repair can
have safety consequences and might void the war-
ranty.
Technical data
Battery type
Operating voltage
Capacity
Continuous discharge current
Charging current recommended/max.
Charging current (reduced)
Charging characteristics
End of charge voltage
Open circuit voltage
Deep discharge protection
Discharge temperature range
Recommended charging temperature range
Charging current - I
max
Reduced charging current temperature
range
10
Possible cause
The battery voltage is below 10 V.
Output is overloaded. (max. 150 mA) Disconnect the cables from the auxil-
Disposal
MT LI 0085
Lithium iron phosphate/LiFePO4 with integrated BMS
85 Ah (C1 @ 20 °C)
100 A
(200 A < 5 sec.)
20 A/50 A
U
cons
4445103613
Solution
Charge the battery for minimum 24h.
iary output and reduce the load. Wait
a few minutes to cool down the bat-
tery and reconnect the cables.
➤ Place the packaging material in the appro-
priate recycling waste bins wherever pos-
sible.
➤ Consult a local recycling center or special-
ist dealer for details about how to dispose
of the product in accordance with the
applicable disposal regulations.
➤ Do not dispose of any batteries with gen-
eral household waste. Return defective or
used batteries to your retailer or dispose of
them at collection points.
MT LI 0105
12,8 V g
105 Ah (C1 @ 20 °C)
160 A
(300 A < 5 sec.)
25 A/80 A
0,05 C
IUoU for LiFePO4 batteries
14,4 V (0,3-1 h)
13,4 V g
≤ 10,5 V g
-20 °C to 60 °C
0 °C to 45°C
=12,8 V below -20 °C and above 50 °C
MT LI 0120
120 Ah (C1 @ 20 °C)
200 A
(400 A < 5 sec.)
30 A/100 A