STIER RW240 Betriebsanleitung Seite 22

• Unplug the power tool from the power source
and/or battery pack before making adjustments,
replacing accessories, or storing power tools. Such
preventive safety measures reduce the risk of
accidentally starting the power tool.
• Keep unused power tools out of the reach of
children and do not allow people who are not
familiar with the power tool or this guide to
operate the power tool. Power tools are
dangerous in the hands of inexperienced users.
• Maintain power tools. Check the alignment or
connection of moving parts, breakage of parts, and
any other conditions that may affect the operation
of the power tool. If the power tool is damaged,
2.5 Safety instructions for mixers
• Always check that the supply voltage matches the
voltage indicated on the tool's nameplate.
• Never use the device in or near an explosive
atmosphere.
• Never mix flammable substances.
• Never reach into the mixing container with your
hand or any other object during mixing.
STIER Industrial GmbH | Friedrichstraße 224 | 10969 Berlin | DE | info@stier.de
have it repaired before use. Many accidents are
caused by poorly maintained power tools.
• Keep the cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less prone to sticking and easier to inspect.
• Use the power tool, accessories and tool bits, etc.,
according to these instructions, taking into
account the specifications and nature of the work
to be performed. Using the power tool for work
other than what was intended can lead to a
dangerous situation.
• Have your power tool serviced by a qualified
professional with only identical spare parts. This
ensures that the safety of the power tool is
guaranteed.
• Wear protective gloves, a dust mask, tight-fitting
clothing and sturdy shoes.
• The noise level at work can exceed 85 dB(A); Wear
hearing protection!
• Always disconnect the plug from the power source
before making adjustments
accessories.
or replacing
22