Tilt Protection; Wifi Setting; Connecting To Wifi; Downloading The App - Emke Erg200W Em Gebrauchsanweisung

Inhaltsverzeichnis

Verfügbare Sprachen

4.8 Tilt Protection

As a safety feature, the heater is fitted with a tilt protection function that automatically stops heating and enter standby

mode if the heater fell down. when the heater is returned to an upright position, press the

heater.

In power on status, Press and hold the

distribution network state. After the distribution network is successfully connected.The WiFi indicator light remains on.

Press and hold the

The maximum time for network configuration is 180 seconds.

After this the pairing mode will need to be reactivated, by holding the

Download the APP onto your smart phone. You can find the app by scanning the QR code below or searching"Smart

Life"in the Google Play or Apple app store. Install and follow the app's instructions to create an account.

NOTE

The Smart life app is a constantly evolving third party system. This guide was correct at time of printing

but may differ slightly from future versions. The app is designed to work on Android or iOS but older

software versions may affect app presentation and performance.

(Now only 2.4G Wi-Fi is supported. Please make sure your Wi-Fi is 2.4.)

Method 1:

Press "Add" button in the upper right corner(in this case, you need to keep your phone Bluetooth on).

Then enter the Wi-Fi password . Press "next" to start connecting.

button for 3 seconds,the WiFi icon flashes and automatically enters the

button for 3 seconds to reset WiFi and reconfigure the network.

button to reactive the

button for 3 seconds.

Inhaltsverzeichnis

Erg200w