Assembly Of The Walking Frame - Fripac-Medis R-1010 Bedienungsanleitung

4.

Assembly of the walking frame

Assembly
Make sure that all the components in the scope of delivery are operational and in per-
fect condition. Do not assemble the rollator if parts are damaged or missing. Push
the release (Fig. 1) upwards and move the back wheel to the correct position until the
release locks in place again (Fig. 2). Do this on both sides. Unfold the rollator by pres-
sing down the seat on the outer edges (Fig. 3) until the seat locks with an audible click.
Insert the two individually packed detachable front wheels in the intended openings
until they lock with an audible click (Fig. 4). To remove the front wheels, click on the two
black buttons and remove the wheels (Fig. 5).
Fig. 1
Fig. 3
Fig. 5
Fig. 2
Fig. 4
en
17