Romoss RM300 Benutzerhandbuch Seite 12

•
Turning Off:
To turn off the device, press and hold the main power switch. The unit will
o
completely shut down unless a charging input source is connected. If a power
source is present, the product will remain operational to prevent
disconnection during charging.
•
Using USB Output:
Confirm the main power supply is active, then press the DC button once. This
o
activates the USB output ports (USB-A, Type-C, and wireless output) with the
blue lamp lighting up to indicate readiness.
Press the DC button again to deactivate USB output and turn off the blue
o
lamp.
•
Using 12V DC Output:
Activate the main power supply and press the DC button to enable the 12V DC
o
output port, such as the Cigar lighter/5525 port. The blue lamp will light up,
confirming functionality.
Press the DC button once more to turn off this output, and the blue lamp will
o
also deactivate.
•
Using AC Output:
Once the main power supply is active, press the AC button to activate the AC
o
output. This action allows you to connect appliances to the AC port.
Press the AC button again to turn off the AC output.
o
•
Using the Lamp:
Press the lighting button to activate the built-in lamp at full brightness.
o
Pressing it a second time will switch to half-brightness mode. Press the button
a third time to enable the SOS signaling mode.
To turn off the lamp or deactivate SOS mode, press the button a fourth time
o
or hold the button for a few seconds.
Note: The battery may enter Sleep Mode after prolonged storage or transportation. Charge
the product for approximately 10 minutes to activate the battery. For optimal results, fully
charge the device before initial use.
12