Renkforce RF-EFS-100 Bedienungsanleitung Seite 3

Operating Instructions
USB-C Electric Fly Swatter
®
Item No. 3365421
1 Operating Instructions for download
Use the link www.conrad.com/downloads
complete operating instructions (or new/current versions if available). Follow the instructions
on the web page.
2 Intended use
The product is an electric fly swatter used to eliminate insects (e.g., flies, mosquitoes) through
the application of electric voltage via a metal grille.
The product is intended for indoor use. Contact with moisture must be avoided under all cir-
cumstances.
If you use the product for purposes other than those described, the product may be damaged.
Improper use can result in short circuits, fires, electric shocks or other hazards.
The product complies with the statutory national and European requirements. For safety and
approval purposes, you must not rebuild and/or modify the product. Read the operating instruc-
tions carefully and store them in a safe place. Make this product available to third parties only
together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights
reserved.
USB4 , USB Type-C and USB-C are registered trademarks of USB Implementers Forum.
® ® ®
3 Delivery content
Electric fly swatter x 2 (White)
USB-C to USB-A charging cable
®
Operating instructions
4 Description of symbols
The following symbols are on the product/appliance or are used in the text:
The symbol warns of hazards that can lead to personal injury.
The symbol warns of dangerous voltage that can lead to personal injury by electric
shock.
Protection class II.
For indoor use.
5 Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting per-
sonal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
5.1 Read first!
This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
the use of the appliance in a safe way, and understand the
hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by chil-
dren without supervision.
5.2 General information
The device is not a toy. Keep it out of the reach of children and pets.
Do not leave packaging material lying around carelessly. This may become dangerous
playing material for children.
(alternatively scan the QR code) to download the
If you have questions which remain unanswered by these operating instructions, contact
our technical support service or other technical personnel.
Maintenance, modifications and repairs must only be completed by a technician or an au-
thorised repair centre.
Hang or mount in a place where it is inaccessible to children.
Do not squeeze the grilles with your fingers. Do not touch the center grille. This will cause
a slight electric shock.
Do not insert any objects into the grille.
5.3 Handling
Please handle the product carefully. Jolts, impacts or a fall even from a low height can
damage the product.
5.4 Operating environment
Do not place the product under any mechanical stress.
Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam
and solvents.
The product is not suitable for use in barns, stables, and similar locations.
Protect the product from high humidity and moisture.
Protect the product from direct sunlight.
Never use near flammable objects or explosive dust.
Do not switch the product on after it has been taken from a cold to a warm environment.
The condensation that forms might destroy the product. Allow the product to reach room
temperature before you use it.
5.5 Operation
High voltage! Do not touch the inner electric grids.
Consult an expert when in doubt about the operation, safety or connection of the appliance.
If it is no longer possible to operate the product safely, take it out of operation and protect
it from any accidental use. DO NOT attempt to repair the product yourself. Safe operation
can no longer be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
5.6 Li-ion battery
The rechargeable battery is permanently built into the product and cannot be replaced.
Never damage the rechargeable battery. Damaging the casing of the rechargeable battery
might cause an explosion or a fire!
Never short-circuit the contacts of the rechargeable battery. Do not throw the battery or the
product into fire. There is a danger of fire and explosion!
Charge the rechargeable battery regularly, even if you do are not using the product. Due
to the rechargeable battery technology being used, you do not need to discharge the re-
chargeable battery first.
Never charge the rechargeable battery of the product unattended.
When charging, place the product on a surface that is not heat-sensitive. It is normal that a
certain amount of heat is generated during charging.
5.7 UV Light
Do not look directly into the UV light!
Do not look into the beam directly or with optical instruments!
6 Product overview
4
5
1
2
6
3
7
1 Working indicator light
2 Charging indicator light
3 Folding handle (180° swivel)
8
4 USB-C charging port
®
5 High-voltage grid button
6 Power switch (ON1/ON2/OFF)
ON1: Turns on electric swatter mode
ON2: Turns on UV lamp mode
OFF: Power off
7 Hanging hole
8 UV light tube