Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Troubleshooting
Problem
No function when On/Off Trigger Switch (4) is operated
Battery will not charge
Blade not cutting thoroughly
Possible cause
No power
Defective On/Off Trigger Switch
Charger not fully inserted
Ambient temperature in excess of operating parameters
Dry blades
Low battery charge
Worn blades
9
Solution
Check power supply
Replace the On/Off Trigger Switch at an authorised GMC
service centre
Check the charger is properly connected to the Charging
Port (5), and check the mains is providing power
Ensure surrounding air temperature is between
4.5°C and 40°C
Lubricate the blades with a suitable spray lubricant
Recharge battery
Replace blades at an authorised GMC service centre
GB
Werbung
Inhaltsverzeichnis
Fehlerbehebung
