Product Familiarisation; Operation - GMC GG36GT Bedienungsanleitung

Garden Trimmer Safety
WARNING: Always keep hands and body parts away from the blade. Contact with the
blade can result in serious injury to the operator or bystanders. Ensure the switch is OFF and
the blades are at a complete standstill when clearing jammed debris.
• During transportation, always carry the trimmer by its handle, with the power off and blade
at a complete standstill. Correct handling of the trimmer will minimise the risk of injury
• Always hold the trimmer by its insulated gripping surfaces only, so in the event that the
blade or any exposed metal on the tool makes contact with a 'live' wire, the risk of electric
shock will be minimised
• Always keep the cable away from the cutting area. Accidentally striking the cable while it is
connected to the tool could result in electric shock
• DO NOT use this tool in the rain or in damp/wet conditions

Product Familiarisation

1. Trimmer Blade
2. Lobe Locator
3. Locating Tab
4. On/Off Trigger Switch
5. Charging Port
6. Safety Switch
7. Charge Indicator Button
8. LED Panel
9. Blade Release Button
10. Shear Blade
11. Mains Plug
12. Charger
13. Charger DC Plug
Intended Use
Battery-powered, hand-held garden trimmer with changeable blades, for domestic light duty
hedge, bush and grass trimming.
Unpacking Your Tool
• Carefully unpack and inspect your new tool. Familiarise yourself with all its features and
functions
• Ensure that all parts of the tool are present and in good condition. If any parts are missing
or damaged, have such parts replaced before attempting to use this tool
Before Use
WARNING: Ensure the tool is disconnected from the power supply before attaching or
changing any accessories, or making any adjustments.
Charging
• The battery is supplied in a low-charge condition. Charge before use
• Before first use, charge the battery for five hours
• Press the Charge Indicator Button (7) to activate the LED Panel (8). This will indicate
whether the battery requires charging
• The Charging Port (5) is located at the rear of the handle. Plug in the Mains Plug (11) into
a mains socket and insert the Charger DC Plug (13) to the Charging Port to begin charging
(Image A)
• The red light on the LED Panel will illuminate while the battery is charging. The charge is
complete when the red light switches off
• An illuminated green light indicates the tool is fully charged; red indicates that a charge
is required
Changing the blade
WARNING: Ensure the tool is disconnected from the power supply and switched off
before attaching or changing any accessories, or making any adjustments.
WARNING: Always wear suitable cut-proof gloves when handling the blade.
1. Place the trimmer on its side on a secure flat surface
2. Remove the blade by pressing the Blade Release Button (9) and pull the blade assembly
'front first' away from the tool
3. Insert the alternative blade 'rear first', slotting the Locating Tab (3) into place
4. Ensure the internal metal lobe aligns with the Lobe Locator (2) and push the blade
assembly into place until a 'click' sound is made

Operation

WARNING: ALWAYS wear eye protection, adequate respiratory and hearing protection,
as well as suitable gloves, when working with this tool.
Switching on and off
WARNING: ALWAYS keep hands and body parts away from the blade.
WARNING: The blades continue to move for a short while after the trimmer has been
switched off.
1. Press and hold the Safety Switch (6)
2. Press the On/Off Trigger Switch (4) to switch the trimmer on
3. To switch off, release the On/Off Trigger Switch and the Safety Switch
Grass trimming
WARNING: The blades keep moving for a short while after the trimmer has been switched off.
• For optimum cutting results, ensure the grass is dry prior to cutting
• When cutting tall grass, cut in sections, working from the top down
• Always keep hands and limbs away from the blade; maintain stable footing and do not
overreach
• Overloading the motor will cause the blade to run slower and become less effective.
Reduce the load to maintain cutting efficiency
• Tilting the tool at a slight angle will increase the effectiveness of the cut
Hedge trimming
WARNING: The blades will coast to a halt after the trimmer has been switched off.
Note: It is recommended to use the Trimmer Blade (1) when trimming thicker shrubbery.
• Tilting the tool at a slight angle will increase the effectiveness of the cut
• Cut the hedge in small stages while working from the outside. Take extra care when
trimming thicker areas of shrubbery
• Always assess the work area prior to trimming. Ensure there are no foreign objects or
debris that might come into contact with the blade
• Regularly lubricate the blades using a suitable spray lubricant. The extra cutting load will
cause the blades to dry out quickly
Accessories
• A range of accessories and consumables, including kevlar cut proof gloves, face shield &
visor and safety goggles, is available from your GMC stockist. Spare parts can be obtained
from toolsparesonline.com
7
GB