RUSTA 917013140201 Gebrauchsanweisung Seite 3

Remote control battery (included):
Material:
USE:
Via the button on the lamp housing:
1. Tap the touch button (
4000K/5000K.
2. Tap the touch button (
Via the remote control:
1
ON OFF
3
Colour Brightness
+/- +/-
4
TIMER
1H 3H
PAIRING
7
T1
1. ON – press to turn on the downlight mode.
2. OFF – press to turn off the downlight mode.
3. Color± – press to choose color temperature from 3000K/4000K/5000K in downlight mode.
4. Brightness± – press to adjust the brightness. Dimmable in 3 steps: 25%, 50% and 100%.
5. ON/OFF – press to turn on/off the uplight.
6. Timer – switches off automatically after 1H/3H/5H.
7&8: T1 , T2 – press to pair the lamp.
• Pairing the remote with the lamp
1. Make sure the lamp is turned off.
2. Press and hold the lamp button (
3. Quickly press T1 or T2 on the remote. Once the lamp stops flashing, pairing is complete.
4. If nothing happens when using the remote, press the lamp button once to turn it on. You
can now control it freely with the remote (optimal control distance: approx. 5 m).
5. Note: T1 and T2 are two separate channels. If T2 is used by mistake when T1 is paired,
simply press T1 again to return to your paired lamp and vice versa.
• Controlling multiple lamps with one remote
1. One remote can control multiple lamps at the same time.
2. To control two separate lamp groups, pair them separately using T1 and T2.
3. The remote has a memory function and will remember the last pairing.
4. To switch between groups, simply press T1 or T2 before controlling the lamps.
1 x CR2025
Plastic
) to turn on/off the downlight and select your preferred color 3000K/
) to turn on/off the uplight.
2
5
ON
OFF
6
5H
8
T2
) until the lamp starts flashing (within 5 seconds).
3