First Update After Device Registration - Advanced Diagnostics Smart Pro Mini Gebrauchsanleitung

Operating Manual - EN

1.1 FIRST UPDATE AFTER DEVICE REGISTRATION

After registration, the device must be updated.
This should only be done the first time, afterwards SMART PRO MINI will update automatically when it is con-
nected to the internet.
Before starting the procedure, make sure the device is switched on and powered (connected to the USB port of
a computer).
Start the MYKEYS Pro APP and connect the device to a WI-FI network.
Once connected to the WI-FI network, the device will automatically connect to the Cloud and start downloading
the first update.
The various steps of the process can be seen by looking at the Cloud connection icon in the connection status
bar:
Process steps:
Cloud connection in progress
Once the download is complete, unplug the power cable. The device will switch off after a short time. To restart
the device, reconnect the power cable.
Note: Once the power is reconnected, restarting the device may take up to two minutes.
IMPORTANT: Once the device has been restarted, the connection to the WI-FI network must be reconfi-
gured.
19
Downloading the update in progress.
(duration 1-10 minutes depending on
internet connection speed)
Copyright ADVANCED DIAGNOSTICS Ltd. 2025
D4A9388XA - SMART PRO MINI
Download completed