Intended Use; Additional Battery Safety Warnings - Ryobi Rglu4 Übersetzung Der Originalanleitung

EN ORIGINAL INSTRUCTIONS
Safety, performance, and dependability have been given top
priority in the design of your glue gun.

INTENDED USE

The glue gun is intended for applying hot glue adhesives.
For best performance use RYOBI glue sticks (RACGS11-12
/ 5132006233).
Do not use the product for any other purpose. Use of the
product for operations different from intended could result in
a hazardous situation.
GLUE GUN SAFETY WARNINGS
The product can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision
or instruction concerning use of the product in a safe
way and understand the hazards involved and are
supervised during use. Children shall not play with the
product. Cleaning and user maintenance shall not be
made by children. Keep the product and its cord out of
reach of children aged less than 8 years.
Use the product in a well-ventilated area to avoid
breathing hot glue vapours.
Do not leave the switched-on product unattended.
If the product is to be stored unused for a long period,
the batteries should be removed.

ADDITIONAL BATTERY SAFETY WARNINGS

To reduce the risk of fire, personal injury, and product
damage due to a short circuit, never immerse your
tool, battery pack, or charger in fluid or allow a fluid
to flow inside them. Corrosive or conductive fluids,
such as seawater, certain industrial chemicals, and
bleach or bleach-containing products, etc., can cause
a short circuit.
The supply terminals are not to be short-circuited.
Non-rechargeable batteries are not to be recharged.
Rechargeable batteries are to be removed from the
product before being charged.
Exhausted batteries are to be removed from the product
and safely disposed of.
TRANSPORTING LITHIUM BATTERIES
Transport the battery in accordance with local and national
provisions and regulations.
Follow all special requirements on packaging and labelling
when transporting batteries by a third party. Ensure that
no batteries can come in contact with other batteries
or conductive materials while in transport by protecting
exposed connectors with insulating, non-conductive caps or
tape. Do not transport batteries that are cracked or leaking.
Check with the forwarding company for further advice.
KNOW YOUR PRODUCT
See page 36.
1. Glue stick chamber
2. LED on/off indicator
3. On/Off switch
4. Kickstand
5. Nozzle
6. Switch trigger
7. Handle, insulated gripping surface
8. Battery cap
9. Glue stick
10. Operator's manual
11. USB charging cable
12. Battery pack
13. USB power adaptor
MAINTENANCE
Use only original accessories and spare parts.
Should components need to be replaced which have
not been described, please contact an authorised
service centre. All repairs should be performed by an
authorised service centre.
Avoid using solvents when cleaning plastic parts.
Most plastics are susceptible to various types of
commercial solvents and may be damaged by their
use. Use clean cloths to remove dirt, carbon dust, etc.
Do not at any time let brake fluids, gasoline,
petroleum-based products, penetrating oils, etc.,
come in contact with plastic parts. Chemicals can
damage, weaken, or destroy which may result in
serious personal injury.
SYMBOLS
Safety alert
Direct current
Please read the instructions carefully before
starting the product.
To reduce the risk of injury or damage, avoid
contact with any hot surface.
Do not dispose of waste batteries, waste
electrical and electronic equipment as
unsorted municipal waste. Waste batteries
and waste electrical and electronic
equipment must be collected separately.
Waste batteries, waste accumulators, and
light sources have to be removed from the
equipment. Check with your local authority
or retailer for recycling advice and collection
point. According to local regulations,
retailers may have an obligation to take
back waste batteries and waste electrical
and electronic equipment free of charge.
Your contribution to the reuse and recycling
of waste batteries and waste electrical and
electronic equipment helps to reduce the
demand of raw materials. Waste batteries,
in particular containing lithium, and waste
electrical and electronic equipment contain
valuable and recyclable materials, which
can adversely impact the environment and
the human health if not disposed of in an
environmentally compatible manner. Delete
personal data from waste equipment, if any.
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
EL
3