STIER RW80 Betriebsanleitung Seite 26

•
Locking the switch for prolonged use (Figure 3). Attention! Hold the power tool firmly in
your hand with both hands at all times. If the tool jams, very strong forces are at work.
•
You set the speed for the agitator at the speed controller, as shown in Figure 4.
•
How to use the power tool:
o
o
o
o
o
o
o
o
o
STIER Industrial GmbH | Friedrichstraße 224 | 10969 Berlín | DE | info@stier.de
Illustration 6
Illustration 7
Mount agitator E on spindle D as shown in Figure 5
Plug the plug into the power strip
Make sure that the container in which you are mixing substances is firmly on the
floor
Insert the agitator into the substance to be mixed in the container
Set the wheel C to a low speed
Turn on the power tool
Slowly increase the speed of the agitator by setting the wheel C to the desired
maximum speed (so fast that the substance is not thrown around outside the
container and the power tool is not overloaded)
Attention! When switched off, the stirring agent must be in the mixing
container
Electronic soft start ensures that the maximum speed of the power tool is
reached slowly.
Hold the power tool with a firm grip!
! Always hold the power tool in the grey-coloured grip area while working.
! Always hold the power tool firmly in both hands.
26