Additional Safety Instructions For Agitators; Use - Stier Rw80 Betriebsanleitung

use the power tool. The power tool can be
dangerous in the hands of untrained persons.
• Ensure appropriate maintenance of the tool.
Check the tool for incorrectly applied or
damaged parts. All malfunctions must be
eliminated before the tool is used. Many
accidents are caused by improper maintenance
of the tool.
• Cutting tools should always be kept clean and
their blades sharpened. Properly sharpened
8.5 Maintenance
• The tool should only be repaired in authorized
workshops using the original spare parts.
9

Additional safety instructions for agitators

• Before using the device, always check whether
the given cable span corresponds to the
required voltage of the power tool.
• Never use the power tool if there is a risk of
explosion in the immediate vicinity.
• Never mix flammable substances with the help
of the power tool.
• Never touch near the mixing basket while the
power tool is in use. Also, when using the tool,
prevent the power tool from coming into
contact with other unwanted objects at all costs.
10

Use

•
On/Off Circuit (Figure 2)
STIER Industrial GmbH | Friedrichstraße 224 | 10969 Berlin | DE | info@stier.de
• Use the power tool and accessories only in
• This ensures the appropriate occupational
• When using the power tool, wear protective
• When using the power tool, it may exceed a
• If you need to replace accessories or otherwise
Illustration 5
cutting tools can be better controlled during
work.
accordance with the instructions above. Use the
tool only according to the task and working
conditions. The improper use of the tool can
significantly increase the risk of danger.
safety of the power tool.
gloves, a dust mask, tight-fitting clothing, and
sturdy shoes.
noise level of 85db (A): Wear ear protection
when using the power tool.
adjust the power tool, switch off the power tool
under all circumstances.
25