Step 5. Ac Wiring; Power On/Off - Renogy Riv2420P2-23S Benutzerhandbuch

Step 5. AC Wiring

█ AC Outlets
You can plug your AC loads directly into the AC Outlets on the inverter's AC side.
█ High Output AC Terminals
You can also permanently connect the AC output from the AC hardwire terminal through the
High Output AC Terminals into a load sub-panel or additional AC outlets powered by the 2000W
inverter/3000W inverter.
From left to right, the terminal block indicates: Live/Hot (L), Neutral (N) and Ground (G).
G

Power On/Off

█ Operations on Inverter
After proper battery and AC load connections, you can operate the inverter.
1. On the AC side, rock the ON/OFF Switch to the ON position.
2. The inverter is operating normally.
When finishing using the inverter, power off the AC loads first, and then rock the ON/OFF Switch
to the OFF position.
N N
L
EN
-31-