Technical Data; Dimensions; Using The Device Correctly - Honeywell 026380.00 Montage- Und Bedienungsanleitung

Contactless reader with RS-232-interface

9. Technical Data

Rated operating voltage
Operating voltage range
Current consumption
Operation temperature range
Storing temperature range
Environment class acc. to VdS
Protection category
Line length RS-232 C - interface
Reading distance
Colour
*
By using the ID keyfob the read distance is reduced.
The device complies with the essential requirements of the R&TTE 1999/5/EC
Directive, if used for its intended use. The EC-Declaration of Conformity can be
downloaded from our homepage.

10. Dimensions

Reader
82
60

11. Using the device correctly

Tap the device lightly with fingertips. Never strike or apply strong pressure to the device.
The use of hard or sharp objects, including fingernails, rings, etc. can cause scratches and damage
the device.
To clean: Wipe the device with a dry soft lint-free cloth, or one that has been lightly dampened with
water.
The use of caustic liquids such as benzene, thinners, alcohol, solvents, or abrasive cleaners of any
kind will lead to surface deterioration and damage.
idle condition
per LED
maximum
(in mm)
12
Connection and
12 V DC
10-15 V DC
50 mA
15 mA
100 mA
-25° C up to +60°C
-30° C up to +60°C
III
IP 64
max. 30 m
approx. 12 cm*
similar to RAL 9002 (grey-white)
Mounting frame
62
86
Operation
Instructions 15
Reader with
mounting frame
12
24