Berührungsloser Leser mit RS-232-Schnittstelle 2 Anschluss- und Bedienungsanleitung 1. Prinzip der berührungslosen Karten Das Innenleben der Karte besteht aus einem Schwingkreis und einem Mikro-Chip, der den Code der Karte gespeichert hat. Der berührungslose Leser straht ein schwaches elektromagnetisches Feld ab, das in Resonanz mit dem Schwingkreis der Karte ist.
Anschluss- und Bedienungsanleitung 3 Berührungsloser Leser mit RS-232-Schnittstelle Relais Daten = 30H Relais aus = 31H Relais an Karteninhalt Daten = 10 ASCII-Zeichen Tastatur Daten = 1 ASCII-Zeichen für gedrückte Taste 4. Übertragungssteuerzeichen ACK0 alternierende positive Rückmeldung ACK1 alternierende positive Rückmeldung ACK2 Rückmeldung nach Sammeltelegramm;...
Seite 4
4 Anschluss- und Bedienungsanleitung Berührungsloser Leser mit RS-232-Schnittstelle Eine gedrückte Taste wird sofort nach jedem Tastendruck gesendet. Beispiel: gelbe LED an, Karte mit Inhalt "80H, 11H, 22H, 33H, FFH" gelesen Leser ASCII DLE 0 STX, 30H, Karteninhalt 31H, gelbe LED an 38H, Byte 0 30H,...
Anschluss- und Bedienungsanleitung 5 Berührungsloser Leser mit RS-232-Schnittstelle 5. Montagehinweise Zwischen berührungslosen Lesern muss ein Mindestabstand von 1 m in allen Richtungen eingehalten werden Für die Montage im Außenbereich empfehlen wir Ihnen den Einsatz des beiliegenden Montagesockels. Der Leser darf nicht direkt auf Metall montiert werden. Die Lesedistanz würde stark vermindert werden.
6 Anschluss- und Bedienungsanleitung Berührungsloser Leser mit RS-232-Schnittstelle 8. LED-Funktionen Die LEDs können sowohl über die RS-232-Schnittstelle als auch über die Anschlussklemme gesetzt bzw. gelöscht werden. Die Definition ihrer Bedeutung wird in der jeweils übergeordneten Software hinterlegt. Softwaremäßig siehe Teil 3: Aufbau des Telegramms. Am Leser selbst können / müssen diesbezüglich keine Einstellungen vorgenommen werden.
Berührungsloser Leser mit RS-232-Schnittstelle Anschluss- und Bedienungsanleitung 7 9. Technische Daten Betriebsnennspannung 12 V DC Betriebsspannungsbereich 10-15 V DC Stromaufnahme Ruhe 50 mA pro LED 15 mA maximal 100 mA Betriebstemperaturbereich -25° C bis +60° C Lagerungstemperaturbereich -30° C bis +60° C Umweltklasse gemäß...
Seite 9
Mounting and Operating Instructions Contactless Reader with RS-232 Interface Item-no. 026380.00 Contents Page 1. Principle of contactless cards ..10 2. Communication ....10 3.
10 Connection and Operation Instructions Contactless reader with RS-232-interface 1. Principle of contactless cards The inside of the card consists of an oscillator circuit and a micro-chip containing the card´s code. The contactless reader broadcasts a low electromagnetic field, which is in resonance with the oscillator circuit of the card.
Operation Connection and Instructions 11 Contactless reader with RS-232-interface Relay Data = 30H relay off = 31H relay on Card content Data = 10 ASCII-digits Keypad Data = 1 ASCII-digit per pressed key 4. Transmission Control Characters ACK0 Alternating positive feedback ACK1 lternating positive feedback ACK2...
Seite 12
Operation 12 Connection and Instructions Contactless reader with RS-232-interface The information "key pressed" is sent immediately after each pressing of a key Example: yellow LED on, Card with content "80H, 11H, 22H, 33H, FFH" read Reader ASCII DLE 0 STX, 30H, Card content 31H,...
Operation Connection and Instructions 13 Contactless reader with RS-232-interface 5. Mounting Information Between contactless readers must be a minimum distance of 1m in all directions. In outside area we recommend to use the including installation socket. Do not install the reader directly on metal as this would considerably reduce the reading distance.
Operation 14 Connection and Instructions Contactless reader with RS-232-interface 8. LED-Functions The LEDs can be set or erased via the RS-232 interface as well as via the terminal. The definition for Software control see part 3: telegram each is specified in the main software and not at the reader. structure.
Operation Connection and Instructions 15 Contactless reader with RS-232-interface 9. Technical Data Rated operating voltage 12 V DC Operating voltage range 10-15 V DC Current consumption idle condition 50 mA per LED 15 mA maximum 100 mA Operation temperature range -25°...