Maintenance And Cleaning - Mobiclinic Andy Anweisungen

FR IT
EN
ES
5. ENERGY SAVING MODE:
The treadmill is equipped with an energy-saving function. If no command input is received within a period
of 4 minutes while the system is in standby mode, it will automatically enter energy-saving mode.
In this mode, the screen will turn off to reduce power consumption. To reactivate the system, simply press
any button.
6. SYSTEM SHUTDOWN:
You can switch off the treadmill at any time by turning off the power switch. This will ensure that it conti-
nues to function properly and prevent possible damage to the equipment.

5. MAINTENANCE AND CLEANING

Proper maintenance ensures that your treadmill remains in optimal condition, while poor maintenance
can damage it or reduce its useful life.
• Before cleaning, performing maintenance or moving the machine, disconnect the plug.
• Clean dust regularly to keep the parts clean.
• Be sure to clean the exposed sides of the tread belt, which will reduce the accumulation of impurities
under the tread belt.
• Ensure your trainers are clean to prevent debris from getting into the plate and treadmill.
• The friction between the belt and the support base affects the performance and durability of the
machine.
• It is recommended to perform maintenance every 1-2 weeks, applying 2 to 3 drops of lubricant. If the
belt continues to slip, add a little more until it works properly. The lubricating oil to be used is SILICONE.
How to apply lubricating oil? (not included)
1. Open the maintenance cover (part number 4) located on the front left edge of the front panel.
2. Gently squeeze the bottle to apply the lubricant to the belt.
3. Close the maintenance cover and run the machine for a few minutes to distribute the lubricant evenly.
4. It is important not to apply silicone lubricant spray, as it can leave marks on the treadmill belt.
DE PT NL SW PL DA
Treadmill without armrests
8 km/h -
ANDY
16