Mobiclinic ANDY Anweisungen Seite 13

FR IT
EN
ES
TRANSPORT WHEELS:
To facilitate transport, the ANDY treadmill has two wheels located on the bottom cover.
The wheels remain suspended without touching the ground, ensuring user safety during use.
To move the product from one room to another, lift the conveyor belt from the side opposite the wheels.
Once you lift the end of the belt, the wheels will touch the floor and you will be able to transport the pro-
duct easily.
3. ASSEMBLY INSTRUCTIONS
1. Cut the adhesive tape on the outside and carefully open the cardboard box.
2. Remove the protective foam pieces and place them inside the box.
3. Carefully lift the base of the treadmill and place it flat on the floor.
4. Remove the PE (polyethylene) bag covering the treadmill.
5. Steps to adjust the height of the treadmill.
• Go to the end of the treadmill.
• Locate a plate on the left side of the treadmill, which has three holes.
• Insert the iron ring into any of the three available holes, depending on the height you wish to
adjust.
• Ensure that the pin is correctly positioned in the selected hole to maintain the stability of the
treadmill at the desired height.
DE PT NL SW PL DA
Treadmill without armrests
8 km/h -
ANDY
13