Zibro SRE346E Gebrauchsanweisung Seite 44

Press the "timer" button P to exit the weekly timer setting mode and return to the
time and a day of the week display. Timer lamp turns off.
COPYING THE SETTING FROM ONE DAY TO ANOTHER
Use the copy function if there are multiple days during one week which should have
the same setting times.
4
86
p074_087_uk_SRE346E.indd 86-87
Then, use the adjustment keys O to set
the minute. Press the adjustment key M
to increase the minute and the key N to
decrease the minute. Press extension/day/
set S to select the right minute.
Use the adjustment keys O to set the hour at
which the heater must shutt off.
Press the adjusment key M to increase the
hour and the key N to decrease the hour.
Press extension/day/set S to select the right
hour.
Then, use the adjustment keys O to set
the minute. Press the adjustment key M
to increase the minute and the key N to
decrease the minute. Press extension/day/
set S to select the right minute.
The settings for program 1 for Monday are
programmed and the display shows SET for
3 seconds.
After 3 seconds choose another day or end
the setting mode by pressing timer.
Make sure that the heater is not burning. Press the
timer key P. Use the adjustment keys O until the day
of its source is displayed in the display.
Press extension/day/set S to select.
The display shows:
Use the adjustment keys N or M O to choose copy.
Press extension/day/set S to select the copy function.
Use the adjustment keys N or M O to select the day to
which the settings should be copied. Press extension/
day/set S to choose the selected day.
The settings for program for Tuesday are programmed
and the display shows SET for 3 seconds.
After 3 seconds choose another day to copy or end the
setting mode by pressing timer.
OPERATING THE WEEK TIMER
Switch on the heater by pressing the POWER button. And then press the timer-key
P immediately after that. The Timer light will light up and the heater shuts off. The
On / Off indicators on the display shows whether the appliance is switched on or off.
When the appliance is switched off by the timer, the
off indicator is visible. The display shows the actual
time.
When the appliance is switched on by the timer, the
on indicator is visible. The display shows the desired
(set) and actual (room) temperature.
4
87
16-05-11 10:39