Adjust Pitch Angle - Hornbach 5905357 Montage- Und Gebrauchsanweisung

Adjust pitch angle

Extract the awning as desired
and remove the hand crank.
Loosen the two nuts on the side
of the articulated arm bracket,
by use of a 17 mm wrench.
Be careful not to remove the
nuts or screws.
The pitch angle is set by loos-
ening or tightening the screw
on the front of the articulated
arm bracket, by use of a 17 mm
wrench.
122 | ENGLISH
1
2
3