Inhaltsverzeichnis
Werbung
Error Messages
Messages d'erreur
Fehlermeldungen
Foutmeldingen
& 90
R
EN
& 91
R
FR
& 92
R
DE
& 93
R
NL
Downloaded from ManualsPrinter.com Manuals
0
Error Messages
It is likely that a paper jam has occurred in the printer. Turn off
the printer, then open the scanner unit and remove the paper.
See your documentation.
Cannot recognize photos. Make sure photos are placed correctly.
See your documentation.
A printer error has occurred. Turn off the printer and turn it on
again. See your documentation.
A scanner error has occurred. See your documentation.
The printer's ink pads are nearing the end of their service life.
Please contact Epson Support.
The printer's ink pads are at the end of their service life. Please
contact Epson Support.
Failed to playback.
The data is too complex to print with Bluetooth.
Error in the data. The document cannot be printed.
Error in the data. The document may not be printed correctly.
Backup Error.
Error Code XXXXXXXX
The combination of IP address and subnet mask is invalid. See
your documentation.
The print head cannot be cleaned completely with Auto Head
Maintenance. See your documentation.
Solution
& 103
R
& 28
R
& 105
R
Turn the printer off and then back on. If the error message still
appears, contact your dealer.
Contact Epson support to replace ink pads before the end of
their service life. When the ink pads are saturated, the printer
stops and Epson support is required to continue printing.
Contact Epson support to replace ink pads.
The video codec for the movie data is not supported. Make sure
that your movie data meets the requirements. See your online
User's Guide.
See the documentation for the device transmitting the data.
See the documentation for the device transmitting the data.
(Cause: The data is not available because of a malfunction in the
device.)
See the documentation for the device transmitting the data.
(Cause: A part of the data is corrupted or cannot be buffered.)
A problem occurred and backup was canceled. Make a note of
the error code and contact your dealer.
See the Networking guide in the online User's Guide for details.
After cleaning, check the print head from the Maintenance
menu in Setup mode. If quality has not improved, contact Epson
support for repairs. If nozzles are still clogged you can continue
printing by setting Automatic Head Maintenance to off from
the Maintenance menu in Setup mode.
Werbung
Inhaltsverzeichnis
