Qwic premium FN7.1 Bedienungsanleitung Seite 47

16 inch 50-305 Circumference: 1272 mm
20 inch 47-406 Circumference: 1571 mm
20 inch 53-406 Circumference: 1590 mm
24 inch 50-507 Circumference: 1907 mm
26 inch 50-559 Circumference: 2070 mm
28 inch 37-622 Circumference: 2187 mm
28 inch 40-622 Circumference: 2205 mm
28 inch 42-622 Circumference: 2218 mm
28 inch 47-622 Circumference: 2249 mm
28 inch 50-622 Circumference: 2268 mm
Default tire sizes:
i
Premium FN7.1: 37-622 tires
Premium RD9.2: 40-622 tires
SET 4: (Speed) Units
With the 'PLUS' and 'MINUS' buttons you can switch
between kilometers (per hour) and miles (per hour).
SET 5: Battery information
With the 'PLUS' and 'MINUS' buttons you can see the
following information of the battery: The percentage of
the remaining battery capacity, the total charging cycles
performed and the actual battery voltage.
SET 6: Maintenance
(Re)set a warning to remind you to get a maintenance
check-up.
SET 7: Software version
Displays the current software version of the display.
Error codes
It is possible that errors occur in the system. If this
happens, consult your dealer to get the problem fixed.
Each error code has a specific meaning:
Error 1:
Error 2:
Error 3:
Error 4:
Error 5:
Error 6:
Error 7:
Error 8:
Error 9:
Display & Controls: Premium hub motors
Problem with 3-phase control from the
controller
Problem with throttle connection (start-
detection)
Motorcable 3-phase wiring loose or defective
Motorcable Hall Sensor signal malfunction
(malfunction in motor or motorcable)
Malfunction in brake sensor(signal)
Battery voltage too low
Motor stalled
Malfunction in controller (signal)
Malfunction in display (signal)
47