Quickguide - Navkom Biohandlex Bedienungsanleitung

ADMINISTRATOR
ENROLMENT
Upper button 3 s
Blue LED is flashing fast.
CHOOSE THE RELAY:
Relay 1: upper button 2 s
Relay 2: lower button 2 s
Relay 1+2: L+R button 2 s
Green LED + buzz 1 s
Blue LED is flashing.
Administrator finger
7-10 s
Green LED + buzz 1s
Finger is stored.
Repeat the procedure 3 times!!!
It is recommended to update the
administrators and users list.
POWER MODE
SELECTION
Upper button 20 s
Hold the button
until green LED starts
flashing.
Power save mode:
both buttons 2 s
Green LED
+ buzz 3 x 1 s
Power saving on.
USER FINGER
ENROLLMENT
Upper button 3 s
Blue LED is flashing.
Administrator finger 1 x
Blue LED is flashing fast.
CHOOSE THE RELAY:
Relay 1: upper button 2 s
Relay 2: lower button 2 s
Relay 1+2: L+R button 2 s
Green LED + buzz 1s
Blue + green LED are
flashing alternately.
User finger 7-10 s
Green LED + buzz 1s
Finger is stored.
It is recommended to
update the administra-
tors and users list.
Constant power mode:
lower button 2 s
Green LED
+ buzz 1 x 1 s
Constant power on.
EN
40
DELETING A
USER FINGER
CHECK THE LIST
Lower button 5 s
Blue LED is flashing.
Administrator finger 1 x
Green LED + buzz 1 s
Green + red LED are
flashing alternately.
User finger1 x
(deleting selection)
Green + red LED
+ buzz 3 x 1 s
User finger
was deleted.
Only one user finger-
print can be deleted
at the time. If a user
has more than one
finger enroled, each
finger must be deleted
separately. Check the
administrators and
users list.
DELETE
ALL
Both buttons 10 s
Blue + red LED are
flashing alternately.
Administrator finger 1 x
Green LED + buzz 1 s
Blue + red LED are
flashing alternately.
Administrator finger 1 x
Blue + red LED
+ buzz 5 x 1 s
Fingerprint database
was deleted.
All fingerprints were
deleted, inluding the
administrators. It is
recommended to
immediately enrol 3
new administrators.