Cleaning The Remote Control; Emptying The Sensowash (If Not Being Used For A Prolonged Period Or With Danger Of Frost) - Duravit sensowash Bedienungsanleitung

> Now press the "Comfortwash" button
The spray wand cleans itself.
The spray wand is flushed with water in the concealed position.
> Press the "Stop" button
> Now press the "Comfortwash" button
The current function stops immediately.
The function is automatically terminated after 5 minutes or when the seat sensor is
activated.

Cleaning the remote control

> Only clean the remote control with a soft, damp cloth.
Emptying the SensoWash
danger of frost)
Caution!
> Disconnect your SensoWash
> Remove the seat unit.
> Open the 2 drain plugs.
The water in the SensoWash
> Screw the drain plugs back in.
> Reconnect the seat unit.
47
14
6
again and hold this pressed.
14
.
(if not being used for a prolonged period or with
®
from the power supply.
®
runs through the openings.
®
on the remote control.